ACPSC04-41SURKWA

SURFACE MOUNT DISPLAY Part Number: ACPSC04-41SURKWA HYPER RED Features 0.4 INCH CHARACTER HEIGHT. LOW CURRENT OPERATION. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm S PEC NO: DSAG4999 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: JUN/01/2006 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1361000056 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACPSC04-41SURKWA HYPER RED (InGaAlP) WHITE DIFFUSED 4700 Typ. 22800 Common Cathode, Rt. Hand Decimal. Description Note: 1. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] ∆λ1/2 C VF [2] IR Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 650 635 28 35 1.95 Max. Units nm nm nm pF Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V 2.5 10 V uA Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 75 30 185 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAG4999 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: JUN/01/2006 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1361000056 Hyper Red ACPSC04-41SURKWA S PEC NO: DSAG4999 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: JUN/01/2006 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1361000056 ACPSC04-41SURKWA Recommended Soldering Pattern (Units : mm; Tolerance: ±0.15) Reel Dimension Tape Specifications (Units : mm) S PEC NO: DSAG4999 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: JUN/01/2006 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1361000056 PACKING & LABEL SPECIFICATIONS ACPSC04-41SURKWA S PEC NO: DSAG4999 APPROVED: J. Lu REV NO: V.1 CHECKED: Joe Lee DATE: JUN/01/2006 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1361000056