ACSA03-41CGKWA-F01

SURFACE MOUNT DISPLAY Part Number: ACSA03-41CGKWA-F01 Green Features 0.3 INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG0265 APPROVED: WYNEC REV NO: V.5 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 1 OF 5 ERP: 1351000396 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACSA03-41CGKWA-F01 Green (InGaAlP) WHITE DIFFUSED 1900 Typ. 11000 Common Anode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 574 570 20 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 75 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAG0265 APPROVED: WYNEC REV NO: V.5 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 2 OF 5 ERP: 1351000396 Green ACSA03-41CGKWA-F01 SPEC NO: DSAG0265 APPROVED: WYNEC REV NO: V.5 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 3 OF 5 ERP: 1351000396 ACSA03-41CGKWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG0265 APPROVED: WYNEC REV NO: V.5 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 4 OF 5 ERP: 1351000396 PACKING & LABEL SPECIFICATIONS ACSA03-41CGKWA-F01 SPEC NO: DSAG0265 APPROVED: WYNEC REV NO: V.5 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 5 OF 5 ERP: 1351000396