ACSA04-41SRWA-F01

SURFACE MOUNT DISPLAY PRELIMINARY SPEC Part Number: ACSA04-41SRWA-F01 Super Bright Red Features 0.4INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE:400PCS/ REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAF7019 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 1 OF 5 ERP: 1351000348 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACSA04-41SRWA-F01 Super Bright Red (GaAlAs) WHITE DIFFUSED 4700 Typ. 18000 Common Anode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 75 30 155 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAF7019 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 2 OF 5 ERP: 1351000348 Super Bright Red ACSA04-41SRWA-F01 SPEC NO: DSAF7019 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 3 OF 5 ERP: 1351000348 ACSA04-41SRWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF7019 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 4 OF 5 ERP: 1351000348 PACKING & LABEL SPECIFICATIONS ACSA04-41SRWA-F01 SPEC NO: DSAF7019 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/14/2007 DRAWN: Y.H.CHEN PAGE: 5 OF 5 ERP: 1351000348