ACSA08-51SGWA

SURFACE MOUNT DISPLAY PRELIMINARY SPEC Part Number: ACSA08-51SGWA Super Bright Green Features 0.8INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE: 200PCS/ REEL MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAH3712 APPROVED: WYNEC REV NO: V.2 CHECKED: Joe Lee DATE: JUN/07/2007 DRAWN: Z.Z.YANG PAGE: 1 OF 5 ERP: 1351000569 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACSA08-51SGWA Super Bright Green (GaP) WHITE DIFFUSED 1900 Typ. 7500 Common Anode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 62.5 25 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAH3712 APPROVED: WYNEC REV NO: V.2 CHECKED: Joe Lee DATE: JUN/07/2007 DRAWN: Z.Z.YANG PAGE: 2 OF 5 ERP: 1351000569 Super Bright Green ACSA08-51SGWA SPEC NO: DSAH3712 APPROVED: WYNEC REV NO: V.2 CHECKED: Joe Lee DATE: JUN/07/2007 DRAWN: Z.Z.YANG PAGE: 3 OF 5 ERP: 1351000569 ACSA08-51SGWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH3712 APPROVED: WYNEC REV NO: V.2 CHECKED: Joe Lee DATE: JUN/07/2007 DRAWN: Z.Z.YANG PAGE: 4 OF 5 ERP: 1351000569 PACKING & LABEL SPECIFICATIONS ACSA08-51SGWA SPEC NO: DSAH3712 APPROVED: WYNEC REV NO: V.2 CHECKED: Joe Lee DATE: JUN/07/2007 DRAWN: Z.Z.YANG PAGE: 5 OF 5 ERP: 1351000569