ACSC04-41SGWA-F01

SURFACE MOUNT DISPLAY Part Number: ACSC04-41SGWA-F01 Super Bright Green Features 0.4INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE:400PCS/ REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG1318 APPROVED: WYNEC REV NO: V.4 CHECKED: Joe Lee DATE: JUN/15/2007 DRAWN: Y.H.CHEN PAGE: 1 OF 5 ERP: 1351000460 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. ACSC04-41SGWA-F01 Super Bright Green (GaP) WHITE DIFFUSED 1900 Typ. 7000 Common Cathode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 62.5 25 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAG1318 APPROVED: WYNEC REV NO: V.4 CHECKED: Joe Lee DATE: JUN/15/2007 DRAWN: Y.H.CHEN PAGE: 2 OF 5 ERP: 1351000460 Super Bright Green ACSC04-41SGWA-F01 SPEC NO: DSAG1318 APPROVED: WYNEC REV NO: V.4 CHECKED: Joe Lee DATE: JUN/15/2007 DRAWN: Y.H.CHEN PAGE: 3 OF 5 ERP: 1351000460 ACSC04-41SGWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG1318 APPROVED: WYNEC REV NO: V.4 CHECKED: Joe Lee DATE: JUN/15/2007 DRAWN: Y.H.CHEN PAGE: 4 OF 5 ERP: 1351000460 PACKING & LABEL SPECIFICATIONS ACSC04-41SGWA-F01 SPEC NO: DSAG1318 APPROVED: WYNEC REV NO: V.4 CHECKED: Joe Lee DATE: JUN/15/2007 DRAWN: Y.H.CHEN PAGE: 5 OF 5 ERP: 1351000460