AM27CGCK09

SUBMINIATURE SOLID STATE LAMP Part Number: AM27CGCK09 Green Features Description z Subminiature package. The Green source color devices are made with AlGaInP on z Z-Bend lead. GaAs substrate Light Emitting Diode. z Long life - solid state reliability. z Low package profile. z Package :1000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC0418 REV NO: V.6 DATE: APR/14/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202000238 Selection Guide Part No. Dice AM27CGCK09 Iv (mcd) [2] @ 20mA Lens Type Green (AlGaInP) Viewing Angle [1] Min. Typ. 2θ1/2 400 600 20° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC0418 REV NO: V.6 DATE: APR/14/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202000238 Green AM27CGCK09 SPEC NO: DSAC0418 REV NO: V.6 DATE: APR/14/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202000238 AM27CGCK09 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAC0418 REV NO: V.6 DATE: APR/14/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202000238 PACKING & LABEL SPECIFICATIONS AM27CGCK09 SPEC NO: DSAC0418 REV NO: V.6 DATE: APR/14/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1202000238