AP1608SURCK

1.6X0.8mm SMD CHIP LED LAMP AP1608SURCK HYPER RED Features 1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. LOW POWER CONSUMPTION. W IDE VIEW ING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL. IN ACCORD WITH Kingbright ENVIRONMENTAL POLICY (DOCUMENT WI-QC-G-0442). RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAB2720 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: OCT/15/2005 DRAWN: Y.W.WANG PAGE: 1 OF 5 ERP: 1203000076 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP1608SURCK HYPER RED (InGaAlP) WATER CLEAR 50 Typ. 150 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 650 635 28 35 1.95 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAB2720 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: OCT/15/2005 DRAWN: Y.W.WANG PAGE: 2 OF 5 ERP: 1203000076 Hyper Red AP1608SURCK SPEC NO: DSAB2720 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: OCT/15/2005 DRAWN: Y.W.WANG PAGE: 3 OF 5 ERP: 1203000076 AP1608SURCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB2720 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: OCT/15/2005 DRAWN: Y.W.WANG PAGE: 4 OF 5 ERP: 1203000076 PACKING & LABEL SPECIFICATIONS AP1608SURCK Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB2720 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: OCT/15/2005 DRAWN: Y.W.WANG PAGE: 5 OF 5 ERP: 1203000076