AP2012SGC

2.0x1.25mm SMD CHIP LED LAMP AP2012SGC SUPER BRIGHT GREEN Features 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAA4050 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1203000170 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP2012SGC SUPER BRIGHT GREEN (GaP) WATER CLEAR 4 Typ. 15 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 105 25 140 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAA4050 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1203000170 Super Bright Green AP2012SGC S PEC NO: DSAA4050 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1203000170 AP2012SGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAA4050 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1203000170