AP3216MGC

3.2x1.6mm SMD CHIP LED LAMP AP3216MGC MEGA GREEN Features 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA8436 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1203000359 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP3216MGC MEGA GREEN (InGaAlP) WATER CLEAR 18 Typ. 70 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA8436 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1203000359 Mega Green AP3216MGC SPEC NO: DSAA8436 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1203000359 AP3216MGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA8436 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1203000359