AP3216SECK

3.2x1.6mm SMD CHIP LED LAMP AP3216SECK SUPER BRIGHT ORANGE Features 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Orange source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0983 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1203000396 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP3216SECK SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 50 Typ. 160 Viewing Angle 2 θ 1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0983 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1203000396 Super Bright Orange AP3216SECK SPEC NO: DSAD0983 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1203000396 AP3216SECK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0983 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1203000396