AP3216SRCPRV

3.2x1.6mm SMD CHIP LED LAMP AP3216SRCPRV SUPER BRIGHT RED Features 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD0979 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: APR/04/2005 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1203000412 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP3216SRCPRV SUPER BRIGHT RED (GaAlAs) WATER CLEAR 36 Typ. 80 Viewing Angle 2 θ 1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 100 30 155 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0979 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: APR/04/2005 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1203000412 Super Bright Red AP3216SRCPRV SPEC NO: DSAD0979 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: APR/04/2005 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1203000412 AP3216SRCPRV Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD0979 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: APR/04/2005 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1203000412 PACKING & LABEL SPECIFCATIONS AP3216SRCPRV Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0979 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: APR/04/2005 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1203000412