AP3216SYCK

3.2x1.6mm SMD CHIP LED LAMP AP3216SYCK SUPER BRIGHT YELLOW Features 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. UV RATED EPOXY. RoHS COMPLIANT. Description The Super Bright Yellow source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA8437 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1203000429 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP3216SYCK SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR 18 Typ. 120 Viewing Angle 2 θ 1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 590 20 20 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 125 30 175 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA8437 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1203000429 Super Bright Yellow AP3216SYCK SPEC NO: DSAA8437 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1203000429 AP3216SYCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA8437 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: MAR/19/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1203000429