APA3010MGC

3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA3010MGC Mega Green Features Description z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness. The Mega Green source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for back light and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC1071 REV NO: V.13 DATE: MAY/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 1 OF 5 ERP: 1203000583 Selection Guide Part No. Dice APA3010MGC Mega Green (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 2θ1/2 36 80 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Mega Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Mega Green 570 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC1071 REV NO: V.13 DATE: MAY/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 2 OF 5 ERP: 1203000583 Mega Green APA3010MGC SPEC NO: DSAC1071 REV NO: V.13 DATE: MAY/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 3 OF 5 ERP: 1203000583 APA3010MGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAC1071 REV NO: V.13 DATE: MAY/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 4 OF 5 ERP: 1203000583 PACKING & LABEL SPECIFICATIONS APA3010MGC SPEC NO: DSAC1071 REV NO: V.13 DATE: MAY/19/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 5 OF 5 ERP: 1203000583