APA3010SGC

3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA3010SGC Features Super Bright Green Description 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1042 REV NO: V.12 DATE: JUN/01/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000624 Selection Guide Part No. Dice APA3010SGC Lens Type Super Bright Green (GaP) Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2=1/2 4 15 120° WATER CLEAR Notes: 1. =1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Cpeak Peak Wavelength Super Bright Green CD [1] Dominant Wavelength IC1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1042 REV NO: V.12 DATE: JUN/01/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000624 Super Bright Green APA3010SGC SPEC NO: DSAD1042 REV NO: V.12 DATE: JUN/01/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000624 APA3010SGC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1042 REV NO: V.12 DATE: JUN/01/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000624 PACKING & LABEL SPECIFICATIONS APA3010SGC SPEC NO: DSAD1042 REV NO: V.12 DATE: JUN/01/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000624