APA3010SURC

3.0x1.0 mm SMD CHIP LED LAMP APA3010SURC HYPER RED Features !3.0mmx1.0mm SMT LED, 2.0mm THICKNESS. !LOW !WIDE !IDEAL Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. POWER CONSUMPTION. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. COLORS AND LENS TYPES AVAILABLE. !VARIOUS !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. S PEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 1 OF 4 Selection Guide Iv (m c d ) @ 20 m A Min . APA3010SURC HYPER RED (InGaAlP) WATER CLEAR 50 Ty p . 120 V i ew i n g An g l e 2θ1/2 12 0 ° Par t No . Dic e L en s Ty p e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°C Sy m b o l λpeak λD ∆λ1/2 C VF IR Par am et er Peak Wavelength Dominate Wavelength Spectral Line Halfwidth Capacitance Forward Voltage Reverse Current D ev i c e Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Ty p . 640 6 28 27 45 1.9 2.5 10 Max . Un it s nm nm nm pF V uA Tes t Co n d it io n s IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Absolute Maximum Ratings at T)=25°C P ar am e t e r Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. H y p e r R ed 170 30 185 5 -40°C To +85°C Un it s mW mA mA V S PEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 2 OF 4 Hyper Red APA3010SURC S PEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 3 OF 4 APA3010SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: CDA0359 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: OCT/25/2001 DRAWN:Y.F.XU PAGE: 4 OF 4