APB2012SURKSYKC

2.0x1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APB2012SURKSYKC Hyper Red Super Bright Yellow Features Description z 2.0mmx1.25mm SMT LED, 1.1mm thickness. The Hyper Red source color devices are made with Al- z Bi -color,Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. The Super Bright Yellow device is made with AlGaInP (on z Ideal for backlight and indicator. GaAs substrate) light emitting diode chip. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM3692 REV NO: V.2A DATE: APR/01/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013093 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 120 200 *40 *80 80 120 *80 *120 Viewing Angle [1] 2θ1/2 Hyper Red (AlGaInP) APB2012SURKSYKC Water Clear Super Bright Yellow (AlGaInP) 150° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 645 590 nm IF=20mA Hyper Red Super Bright Yellow 630 590 nm IF=20mA Spectral Line Half-width Hyper Red Super Bright Yellow 28 20 nm IF=20mA C Capacitance Hyper Red Super Bright Yellow 35 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Super Bright Yellow 1.95 2 V IF=20mA 2.5 2.5 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 175 mA Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAM3692 REV NO: V.2A DATE: APR/01/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013093 APB2012SURKSYKC Hyper Red SPEC NO: DSAM3692 REV NO: V.2A DATE: APR/01/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013093 Super Bright Yellow SPEC NO: DSAM3692 REV NO: V.2A DATE: APR/01/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013093 APB2012SURKSYKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAM3692 REV NO: V.2A DATE: APR/01/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013093 PACKING & LABEL SPECIFICATIONS APB2012SURKSYKC All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM3692 REV NO: V.2A DATE: APR/01/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203013093