APB3025YSGC-F01_11

3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: APB3025YSGC-F01 Yellow Super Bright Green Features 3.0mmx2.5mm SMT LED, 1.1mm thickness. Bi -color,low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package : 2000pcs / reel. Moisture sensitivity level : level 3. RoHS compliant. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 1 OF 6 ERP: 1203000776 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APB3025YSGC-F01 Yellow (GaAsP/GaP) Super Bright Green (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 120° Typ. 10 15 Water Clear 5 8 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Typ. 590 565 588 568 35 30 20 15 2.1 2.2 2.5 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 75 30 140 5 Super Bright Green 62.5 25 140 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 2 OF 6 ERP: 1203000776 APB3025YSGC-F01 Yellow SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 3 OF 6 ERP: 1203000776 Super Bright Green SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 4 OF 6 ERP: 1203000776 APB3025YSGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 5 OF 6 ERP: 1203000776 PACKING & LABEL SPECIFICATIONS APB3025YSGC-F01 SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 6 OF 6 ERP: 1203000776