APBA3010ESGC

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010ESGC HIGH EFFICIENCY RED SUPER BRIGHT GREEN Features 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLRS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF0736 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/03/2005 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1203000795-01 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. HIGH EFFICIENCY RED (GaAsP/GaP) APBA3010ESGC SUPER BRIGHT GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Viewing Angle 2θ1/2 140° Typ. 12 12 4 WATER CLEAR 4 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green All Typ. 627 565 625 568 45 30 15 15 2.0 2.2 2.5 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. High Efficiency Red 105 30 160 5 Super Bright Green 105 25 140 Units mW mA mA V -40°C To +85°C SPEC NO: DSAF0736 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/03/2005 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1203000795-01 APBA3010ESGC High Efficiency Red SPEC NO: DSAF0736 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/03/2005 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1203000795-01 Super Bright Green A PBA3010ESGC SPEC NO: DSAF0736 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/03/2005 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1203000795-01 APBA3010ESGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength),the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAF0736 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/03/2005 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1203000795-01