APBA3010SGNC

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010SGNC SUPER BRIGHT GREEN PURE ORANGE Features 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLRS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The Pure Orange source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Pure Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1094 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/23/2003 DRAWN: L.Y.WU PAGE: 1 OF 5 Selection Guide Iv (mcd) @ 20mA Min. SUPER BRIGHT GREEN (GaP) APBA3010SGNC PURE ORANGE (GaAsP/GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Part No. Dice Lens Type Viewing Angle 2θ1/2 140° Typ. 12 12 2.6 WATER CLEAR 4 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Pure Orange Super Bright Green Pure Orange Super Bright Green Pure Orange Super Bright Green Pure Orange Super Bright Green Pure Orange All Typ. 565 607 568 610 30 35 15 15 2.2 2.05 2.5 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation [2] DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 105 25 140 5 Pure Orange 105 25 145 5 -40℃ To +85℃ Units mW mA mA V SPEC NO: DSAD1094 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/23/2003 DRAWN: L.Y.WU PAGE: 2 OF 5 APBA3010SGNC Super Bright Green SPEC NO: DSAD1094 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/23/2003 DRAWN: L.Y.WU PAGE: 3 OF 5 Pure Orange SPEC NO: DSAD1094 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/23/2003 DRAWN: L.Y.WU PAGE: 4 OF 5 APBA3010SGNC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1094 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/23/2003 DRAWN: L.Y.WU PAGE: 5 OF 5