APBA3010SURKSGC

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP APBA3010SURKSGC HYPER RED SUPER BRIGHT GREEN Features 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLRS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1090 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/29/2003 DRAWN: S.J.HOU PAGE: 1 OF 5 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. HYPER RED (InGaAlP) APBA3010SURKSGC SUPER BRIGHT GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Viewing Angle 2 θ 1/2 140° Typ. 200 12 110 WATER CLEAR 2.6 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Super Bright Green Hyper Red Super Bright Green Hyper Red Super Bright Green Hyper Red Super Bright Green Hyper Red Super Bright Green All Typ. 650 565 635 568 28 30 35 15 1.95 2.2 2.5 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 Super Bright Green 105 25 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1090 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/29/2003 DRAWN: S.J.HOU PAGE: 2 OF 5 APBA3010SURKSGC Hyper Red SPEC NO: DSAD1090 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/29/2003 DRAWN: S.J.HOU PAGE: 3 OF 5 Super Bright Green SPEC NO: DSAD1090 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/29/2003 DRAWN: S.J.HOU PAGE: 4 OF 5 APBA3010SURKSGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1090 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: DEC/29/2003 DRAWN: S.J.HOU PAGE: 5 OF 5