APBA3210SYKCGKC-F01

3.2x1.0mm RIGHT ANGLE BI-COLOR SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APBA3210SYKCGKC-F01 Super Bright Yellow Green Features LOW POWER CONSUMPTION. 3.2mmX1.0mm RIGHT ANGLE SMT LED,1.5mm THICKNESS. WIDE VIEWING ANGLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1095 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203003893 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Super Bright Yellow (InGaAlP) APBA3210SYKCGKC-F01 Green (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 120° Typ. 150 50 50 WATER CLEAR 18 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Typ. 590 574 590 570 20 20 20 15 2 2.1 2.5 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 75 30 175 5 Green 75 30 150 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAF1095 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203003893 APBA3210SYKCGKC-F01 Super Bright Yellow SPEC NO: DSAF1095 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203003893 Green SPEC NO: DSAF1095 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203003893 APBA3210SYKCGKC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1095 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203003893 PACKING & LABEL SPECIFICATIONS APBA3210SYKCGKC-F01 SPEC NO: DSAF1095 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203003893