APBA3210YSGC-F01

3.2x1.0mm RIGHT ANGLE BI-COLOR SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APBA3210YSGC-F01 Yellow Super Bright Green Features LOW POWER CONSUMPTION. 3.2mmX1.0mm RIGHT ANGLE SMT LED,1.5mm THICKNESS. WIDE VIEWING ANGLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1096 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203003894 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Yellow (GaAsP/GaP) APBA3210YSGC-F01 Super Bright Green (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 120° Typ. 8 12 2.6 WATER CLEAR 4 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Yellow Super Bright Green Typ. 590 565 588 568 35 30 20 15 2.1 2.2 2.5 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 75 30 140 5 Super Bright Green 62.5 25 140 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAF1096 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203003894 APBA3210YSGC-F01 Yellow SPEC NO: DSAF1096 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203003894 Super Bright Green SPEC NO: DSAF1096 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203003894 APBA3210YSGC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1096 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203003894 PACKING & LABEL SPECIFICATIONS APBA3210YSGC-F01 SPEC NO: DSAF1096 APPROVED: WYNEC REV NO: V.4 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203003894