APBDA3020PBACGKC

3.0x2.0mm RIGHT ANGLE SMD LED PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APBDA3020PBACGKC Blue Green Features 3.0mmx2.0mm SMT LED,2.8mm THICKNESS. LOW POWER CONSUMPTION. VARIOUS COLORS AND LENS TYPES AVAILABLE. IDEAL FOR BACK LIGHT AND INDICATOR PACKAGE : 2000PCS / REEL. WHEN SOLDERED IN THE SIDEVIEW CONFIGURATION, THE MAXIMUM SHEAR TOLERANCE OF THE EPOXY LENS IS 300G. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG9428 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203006470 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Blue (InGaN) APBDA3020PBACGKC Green (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 15 ° Typ. 220 320 110 WATER CLEAR 180 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Blue Green Blue Green Blue Green Blue Green Blue Green Blue Green Typ. 468 574 470 570 21 20 100 15 3.2 2.1 4 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 120 30 100 5 Green 75 30 150 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAG9428 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203006470 APBDA3020PBACGKC Blue SPEC NO: DSAG9428 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203006470 Green SPEC NO: DSAG9428 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203006470 APBDA3020PBACGKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG9428 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203006470 PACKING & LABEL SPECIFICATIONS APBDA3020PBACGKC SPEC NO: DSAG9428 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203006470