APBL3025SRQGCPR-F01

3.0x2.5mm SURFACE MOUNT LED LAMP APBL3025SRQGCPR-F01 SUPER BRIGHT RED GREEN Features 3.0mmx2.5mm SMT LED, 1.4mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. INNER LENS TYPE PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1333 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/29/2005 DRAWN: B.H.LI PAGE: 1 OF 5 ERP: 1203000916-01 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. SUPER BRIGHT RED (GaAlAs) APBL3025SRQGCPR-F01 GREEN (GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Viewing Angle 2θ1/2 100° Typ. 100 20 36 WATER CLEAR 7 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Green Super Bright Red Green Super Bright Red Green Super Bright Red Green Super Bright Red Green All Typ. 660 560 640 565 20 30 45 45 1.85 2.15 2.5 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 100 30 155 5 Green 105 25 130 Units mW mA mA V -40°C To +85°C SPEC NO: DSAF1333 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/29/2005 DRAWN: B.H.LI PAGE: 2 OF 5 ERP: 1203000916-01 APBL3025SRQGCPR-F01 Super Bright Red SPEC NO: DSAF1333 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/29/2005 DRAWN: B.H.LI PAGE: 3 OF 5 ERP: 1203000916-01 Green SPEC NO: DSAF1333 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/29/2005 DRAWN: B.H.LI PAGE: 4 OF 5 ERP: 1203000916-01 APBL3025SRQGCPR-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1333 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/29/2005 DRAWN: B.H.LI PAGE: 5 OF 5 ERP: 1203000916-01