APBVA3010EYC

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APBVA3010EYC High Efficiency Red Yellow Features Description z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Wide viewing angle. Light Emitting Diode. z Ideal for backlight and indicator. The Yellow source color devices are made with Gallium z Various colors and lens types available. Arsenide Phosphide on Gallium Phosphide Yellow Light z Package : 2000pcs / reel. Emitting Diode. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI8841 REV NO: V.2 DATE: APR/01/2009 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008693 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 7 15 2.6 6 High Efficiency Red (GaAsP/GaP) APBVA3010EYC Viewing Angle [1] 2θ1/2 140° WATER CLEAR Yellow (GaAsP/GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 590 nm IF=20mA High Efficiency Red Yellow 625 588 nm IF=20mA Spectral Line Half-width High Efficiency Red Yellow 45 35 nm IF=20mA C Capacitance High Efficiency Red Yellow 15 20 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Yellow 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI8841 REV NO: V.2 DATE: APR/01/2009 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008693 APBVA3010EYC High Efficiency Red SPEC NO: DSAI8841 REV NO: V.2 DATE: APR/01/2009 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008693 Yellow SPEC NO: DSAI8841 REV NO: V.2 DATE: APR/01/2009 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008693 APBVA3010EYC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAI8841 REV NO: V.2 DATE: APR/01/2009 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008693 PACKING & LABEL SPECIFICATIONS APBVA3010EYC SPEC NO: DSAI8841 REV NO: V.2 DATE: APR/01/2009 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008693