APBVA3010SYKCGKC

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APBVA3010SYKCGKC Super Bright Yellow Green Features Description z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness. The Super Bright Yellow device is made with AlGaInP (on z Low power consumption. GaAs substrate) light emitting diode chip. z Wide viewing angle. The Green source color devices are made with AlGaInP on z Ideal for backlight and indicator. GaAs substrate Light Emitting Diode. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAI8843 REV NO: V.2 DATE: APR/01/2009 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008695 Selection Guide Part No. Dice Lens Type Super Bright Yellow (AlGaInP) APBVA3010SYKCGKC Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 50 150 18 50 2θ1/2 140° WATER CLEAR Green (AlGaInP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 574 nm IF=20mA Super Bright Yellow Green 590 570 nm IF=20mA Spectral Line Half-width Super Bright Yellow Green 20 20 nm IF=20mA C Capacitance Super Bright Yellow Green 20 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow Green 2 2.1 2.5 2.5 V IF=20mA IR Reverse Current Super Bright Yellow Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 175 150 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAI8843 REV NO: V.2 DATE: APR/01/2009 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008695 APBVA3010SYKCGKC Super Bright Yellow SPEC NO: DSAI8843 REV NO: V.2 DATE: APR/01/2009 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008695 Green SPEC NO: DSAI8843 REV NO: V.2 DATE: APR/01/2009 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008695 APBVA3010SYKCGKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAI8843 REV NO: V.2 DATE: APR/01/2009 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008695 PACKING & LABEL SPECIFICATIONS APBVA3010SYKCGKC SPEC NO: DSAI8843 REV NO: V.2 DATE: APR/01/2009 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.M.Wu ERP: 1203008695