APD2520MBC03

4.5x2mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES APD2520MBC03 BLUE Features 4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. I DEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1000PCS/REEL. RoHS COMPLIANT. Description The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0 .2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAA7717 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1203001023 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APD2520MBC03 BLUE (GaN) WATER CLEAR 10 Typ. 40 Viewing Angle 2θ1/2 20° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 430 466 60 100 3.8 4.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA7717 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1203001023 Blue APD2520MBC03 SPEC NO: DSAA7717 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1203001023 APD2520MBC03 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAA7717 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1203001023