APD2520SURC03

4.5x2mm SMD CHIP LED LAMP APD2520SURC03 HYPER RED Features 4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. I DEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1000PCS/REEL. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0 .2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. S PEC NO: DSAD1074 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: B.H.LI PAGE: 1 OF 4 ERP: 1203001046 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. APD2520SURC03 HYPER RED (InGaAlP) WATER CLEAR 280 Typ. 700 Viewing Angle 2θ1/2 20° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAD1074 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: B.H.LI PAGE: 2 OF 4 ERP: 1203001046 Hyper Red APD2520SURC03 S PEC NO: DSAD1074 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: B.H.LI PAGE: 3 OF 4 ERP: 1203001046 APD2520SURC03 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAD1074 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: B.H.LI PAGE: 4 OF 4 ERP: 1203001046