APD3224MGC-F01

3.2x2.4mm SMD CHIP LED LAMP APD3224MGC-F01 MEGA GREEN Features z3.2x2.4mm SMT LED, 2.4mm THICKNESS. zLOW POWER CONSUMPTION. zIDEAL FOR BACKLIGHT AND INDICATOR. zPACKAGE : 1500PCS / REEL. zRoHS COMPLIANT. Description The Mega Green source color devices are m ade with DH InGaAlP on GaAs substrate Light E mitting Diode. zVARIOUS COLORS AND LENS TYPES AVAILABLE. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAF1082 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1203001060-01 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. APD3224MGC-F01 MEGA GREEN (InGaAlP) WATER CLEAR 280 Typ. 550 Viewing Angle 2θ1/2 20° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAF1082 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1203001060-01 Mega Green APD3224MGC-F01 SPEC NO: DSAF1082 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1203001060-01 APD3224MGC-F01 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1082 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1203001060-01