APD3224SEC-F01

3.2x2.4mm SMD CHIP LED LAMP APD3224SEC-F01 SUPER BRIGHT ORANGE Features z3.2x2.4mm SMT LED, 2.4mm THICKNESS. zLOW POWER CONSUMPTION. zIDEAL FOR BACKLIGHT AND INDICATOR. zPACKAGE : 1500PCS / REEL. zRoHS COMPLIANT. Description The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. zVARIOUS COLORS AND LENS TYPES AVAILABLE. Package Dimension s Notes: 1. All dimensions are in millimeters (inches) . 2. T olerance is ± 0 .1(0.004") unless otherwise noted . 3.Specifications are subject to change without notice . S PEC NO: DSAF1084 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1203001073 -01 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APD3224SEC-F01 SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 650 Typ. 2000 Viewing Angle 2θ1/2 20° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 30 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAF1084 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1203001073 -01 Super Bright Orange APD3224SEC-F01 S PEC NO: DSAF1084 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1203001073 -01 APD3224SEC-F01 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAF1084 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1203001073 -01