APDA02-41MBWA

SURFACE MOUNT DISPLAY APDA02-41MBWA BLUE Features !0.2INCH Description The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. DIGIT HEIGHT. !LOW CURRENT OPERATION. !EXCELLENT CHARACTER APPEARANCE. !I.C. COMPATIBLE. !MECHANICALLY RUGGED. !GRAY FACE,WHITE SEGMENT. ! PACKAGE : 600PCS / REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches),Tolerance is ±0.25(0.01") unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e L en s Ty p e Iv (u c d ) @ 10 m A Min . APDA02-41MBWA BLUE(GaN) WHITE DIFFUSED 800 Ty p . 3700 Common Anode,Rt. Hand Decimal D es c r i p t i o n Electrical / Optical Characteristics at TA=25°C Sy m b o l λpeak λD ∆λ1/2 C VF IR P ar am et er Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue D ev i c e Ty p . 430 466 60 100 3.8 4.5 10 Max . Un its nm nm nm pF V uA Tes t Co n d it io n s I F =20mA I F =20mA I F =20mA VF=0V;f=1MHz I F =20mA V R = 5V Absolute Maximum Ratings at TA=25°C P ar am et er Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. B lu e 105 30 150 5 -40°C To +85°C Un its mW mA mA V SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 2 OF 4 Blue APDA02-41MBWA SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 3 OF 4 APDA02-41MBWA SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specification (Units : mm) SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 4 OF 4