APECVA3010MGC

3.0x1.0 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APECVA3010MGC Mega Green Features Description z 3.0mmx1.0mm SMT LED, 2.0mm thickness. The Mega Green source color devices are made with z Low power consumption. AlGaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for back light and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1857 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 1 OF 5 ERP: 1203009112 Selection Guide Part No. Dice APECVA3010MGC Lens Type Mega Green (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 36 80 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Mega Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 574 nm IF=20mA Mega Green 570 nm IF=20mA Spectral Line Half-width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Mega Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ1857 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 2 OF 5 ERP: 1203009112 Mega Green APECVA3010MGC SPEC NO: DSAJ1857 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 3 OF 5 ERP: 1203009112 APECVA3010MGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ1857 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 4 OF 5 ERP: 1203009112 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ1857 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APECVA3010MGC DATE: MAR/19/2009 DRAWN: S.P.Chen PAGE: 5 OF 5 ERP: 1203009112