APECVA3010SECK

3.0x1.0 mm SMD CHIP LED LAMP Part Number: APECVA3010SECK PRELIMINARY SPEC Super Bright Orange Features Description z3.0mmx1.0mm SMT LED, 2.0mm thickness. The Super Bright Orange device is made with AlGaInP (on zLow power consumption. GaAs substrate) light emitting diode chip. zWide viewing angle. zIdeal for back light and indicator. zPackage : 2000pcs / reel. zMoisture sensitivity level : level 3. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1861 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 1 OF 5 ERP: 1203009105 Selection Guide Part No. Dice APECVA3010SECK Lens Type Super Bright Orange (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 70 250 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ1861 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 2 OF 5 ERP: 1203009105 Super Bright Orange APECVA3010SECK SPEC NO: DSAJ1861 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 3 OF 5 ERP: 1203009105 APECVA3010SECK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ1861 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 4 OF 5 ERP: 1203009105 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ1861 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APECVA3010SECK DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 5 OF 5 ERP: 1203009105