APECVA3010SRCPRV

3.0x1.0 mm SMD CHIP LED LAMP Part Number: APECVA3010SRCPRV PRELIMINARY SPEC Super Bright Red Features Description z3.0mmx1.0mm SMT LED, 2.0mm thickness. The Super Bright Red source color devices are made with zLow power consumption. Gallium Aluminum Arsenide Red Light Emitting Diode. zWide viewing angle. zIdeal for back light and indicator. zPackage : 2000pcs / reel. zMoisture sensitivity level : level 3. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1863 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 1 OF 5 ERP: 1203009109 Selection Guide Part No. Dice APECVA3010SRCPRV Lens Type Super Bright Red (GaAlAs) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 50 100 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ1863 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 2 OF 5 ERP: 1203009109 Super Bright Red APECVA3010SRCPRV SPEC NO: DSAJ1863 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 3 OF 5 ERP: 1203009109 APECVA3010SRCPRV Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ1863 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 4 OF 5 ERP: 1203009109 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ1863 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APECVA3010SRCPRV DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 5 OF 5 ERP: 1203009109