APECVA3010SYCK

3.0x1.0 mm SMD CHIP LED LAMP Part Number: APECVA3010SYCK PRELIMINARY SPEC Super Bright Yellow Features Description z3.0mmx1.0mm SMT LED, 2.0mm thickness. The Super Bright Yellow device is made with AlGaInP (on zLow power consumption. GaAs substrate) light emitting diode chip. zWide viewing angle. zIdeal for back light and indicator. zPackage : 2000pcs / reel. zMoisture sensitivity level : level 3. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1865 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 1 OF 5 ERP: 1203009107 Selection Guide Part No. Dice APECVA3010SYCK Lens Type Super Bright Yellow (AlGaInP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 50 150 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ1865 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 2 OF 5 ERP: 1203009107 Super Bright Yellow APECVA3010SYCK SPEC NO: DSAJ1865 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 3 OF 5 ERP: 1203009107 APECVA3010SYCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAJ1865 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 4 OF 5 ERP: 1203009107 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ1865 REV NO: V.1 APPROVED: WYNEC CHECKED: Allen Liu APECVA3010SYCK DATE: MAR/19/2009 DRAWN: Y.F.Lu PAGE: 5 OF 5 ERP: 1203009107