APECVA3010ZGC

3.0x1.0 mm SMD CHIP LED LAMP Part Number: APECVA3010ZGC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.0mmx1.0mm SMT LED, 2.0mm thickness. The Green source color devices are made with InGaN z Low power consumption. on Sapphire Light Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for back light and indicator. It is recommended to use a wrist band or anti-electrostatic z Package : 2000pcs / reel. glove when handling the LEDs. z Moisture sensitivity level : level 3. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ1868 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/02/2010 DRAWN: Z.Q.NI PAGE: 1 OF 5 ERP: 1203009113 Selection Guide Part No. Dice APECVA3010ZGC Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 110 350 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ1868 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/02/2010 DRAWN: Z.Q.NI PAGE: 2 OF 5 ERP: 1203009113 Green APECVA3010ZGC SPEC NO: DSAJ1868 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/02/2010 DRAWN: Z.Q.NI PAGE: 3 OF 5 ERP: 1203009113 APECVA3010ZGC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ1868 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/02/2010 DRAWN: Z.Q.NI PAGE: 4 OF 5 ERP: 1203009113 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ1868 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu APECVA3010ZGC DATE: MAR/02/2010 DRAWN: Z.Q.NI PAGE: 5 OF 5 ERP: 1203009113