APED3528SURCK-F01

APED3528SURCK-F01 3.5 x 2.8 mm SMD Chip LED Lamp DESCRIPTIONS


The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded tia l
PACKAGE DIMENSIONS







Single color Suitable for all SMD assembly and solder process Ideal for backlighting Available on tape and reel Package: 500 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant




on fid APPLICATIONS en FEATURES Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) C Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number APED3528SURCK-F01 Emitting Color (Material) ■ Hyper Red (AlGaInP) Iv (mcd) @ 20mA [2] Viewing Angle [1] Lens Type Min. Typ. 480 800 *120 *250 2θ1/2 70° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. © 2020 Kingbright. All Rights Reserved. Spec No: DSAH3739 / 1203001143 Rev No: V.8A Date: 08/01/2020 Page 1 / 4 APED3528SURCK-F01 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Value Parameter Symbol Unit Typ. Max. λpeak Hyper Red 645 - nm λdom [1] Hyper Red 630 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA ∆λ Hyper Red 28 - nm Capacitance C Hyper Red 35 - pF Forward Voltage IF = 20mA VF [2] Hyper Red 1.95 2.5 V Reverse Current (VR = 5V) IR Hyper Red - 10 µA Hyper Red 0.14 - nm/°C Hyper Red 0.05 - nm/°C -1.9 - mV/°C Dominant Wavelength IF = 20mA TCλpeak Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 85°C TCλdom Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 85°C TCV en Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 85°C tia l Wavelength at Peak Emission IF = 20mA Emitting Color Hyper Red on fid Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Value Unit PD 75 mW VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 30 mA IFM [1] 185 mA Electrostatic Discharge Threshold (HBM) - 3000 V Thermal Resistance (Junction / Ambient) Rth JA [2] 630 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 530 °C/W Power Dissipation C Reverse Voltage Peak Forward Current Symbol Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rt h JA ,Rt h JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. © 2020 Kingbright. All Rights Reserved. Spec No: DSAH3739 / 1203001143 Rev No: V.8A Date: 08/01/2020 Page 2 / 4 APED3528SURCK-F01 TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Red Relative Intensity (a. u.) 100% Ta = 25 °C Ta = 25 °C 80% 0° -15° 15° 30° -30° 45° -45° 60% 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 0.5 0.0 90° 1.0 0.5 2.5 40 30 20 10 2.0 1.5 1.0 0.5 0.0 2.5 2.5 40 30 20 10 0 0 10 20 30 40 Forward current (mA) 50 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) on fid 1.7 1.9 2.1 2.3 Forward voltage (V) Luminous Intensity vs. Ambient Temperature 50 Ta = 25 °C en Forward current (mA) Ta = 25 °C Permissible forward current (mA) Luminous intensity normalised at 20 mA 50 0 1.5 Forward Current Derating Curve Luminous Intensity vs. Forward Current 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) TAPE SPECIFICATIONS (units : mm) C REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage tia l HYPER RED REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. © 2020 Kingbright. All Rights Reserved. Spec No: DSAH3739 / 1203001143 Rev No: V.8A Date: 08/01/2020 Page 3 / 4 APED3528SURCK-F01 C on fid en tia l PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes © 2020 Kingbright. All Rights Reserved. Spec No: DSAH3739 / 1203001143 Rev No: V.8A Date: 08/01/2020 Page 4 / 4