APED3820MGC

3.8x2.0mm DOME LENS SMD CHIP LED LAMP APED3820MGC MEGA GREEN Features lLOW l3.8mmx2.0mm SMT LED,3.2mm THICKNESS. lIDEAL FOR BACKLIGHT AND INDICATOR. l VARIOUS lPACKAGE Description POWER CONSUMPTION. The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. COLORS AND LENS TYPES AVAILABLE. : 500PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB0343 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/03/2003 DRAWN: Z.Y.YANG PAGE: 1 OF 4 Selection Guide P ar t N o . APED 3820MGC Dic e MEGA GREEN(InGaAIP) L en s Ty p e WATER C LEAR Mi n . 70 Iv (m c d ) @ 20 m A Ty p . 250 V i ew i n g An g le 60° (H) 35° (V) 2θ1/2 Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Sy m b o l P ar am et er Peak Wavelength D omi nate Wavelength Spectral Li ne Half-wi dth C apaci tance Forward Voltage Reverse C urrent D ev i c e Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Ty p . 574 568 26 20 2.1 2.5 10 Max . Un its nm nm nm pF V uA Tes t C o n d i t i o n s IF = 2 0 m A IF = 2 0 m A IF = 2 0 m A V F = 0 V;f= 1 M Hz IF = 2 0 m A VR = 5V λp e a k λD ∆λ 1/2 C VF IR Absolute Maximum Ratings at TA=25°C P ar am et er Power di ssi pati on Meg a Gr een 105 150 -40°C To +85°C 5 30 Un its mW mA V mA Reverse Voltage Peak Forward C urrent [1] D C Forward C urrent Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Operati ng/Storage Temperature SPEC NO: DSAB0343 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/03/2003 DRAWN: Z.Y.YANG PAGE: 2 OF 4 Mega Green APED3820MGC SPEC NO: DSAB0343 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/03/2003 DRAWN: Z.Y.YANG PAGE: 3 OF 4 APED3820MGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB0343 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/03/2003 DRAWN: Z.Y.YANG PAGE: 4 OF 4