APED3820SEC-F01

3.8x2.0mm DOME LENS SMD CHIP LED LAMP APED3820SEC-F01 SUPER BRIGHT ORANGE z3.8mmx2.0mm zLOW zIDEAL Features Description SMT LED,3.2mm THICKNESS. The Super Bright Orange devices is made with DH I nGaAlP (on GaAs substrate¼ light emitting diode chip. POWER CONSUMPTION. FOR BACKLIGHT AND INDICATOR. COLORS AND LENS TYPES AVAILABLE. : 500PCS / REEL. zVARIOUS zRoHS zPACKAGE COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1200 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 4 ERP:1203001175 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APED3820SEC-F01 SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 480 Typ. 800 Viewing Angle 2 θ 1/2 60°(H) 35°(V) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 30 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAF1200 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 4 ERP:1203001175 Super Bright Orange APED3820SEC-F01 SPEC NO: DSAF1200 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 4 ERP:1203001175 APED3820SEC-F01 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1200 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 4 ERP:1203001175