APEKA3224SGC

3.2x2.4mm RIGHT ANGLE SMD CHIP LED LAMP APEKA3224SGC SUPER BRIGHT GREEN Features 3.2mmx2.4mm RIGHT ANGLE SMT LED, 2.4mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB9029 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1204000010 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. APEKA3224SGC SUPER BRIGHT GREEN (GaP) WATER CLEAR 7 Typ. 20 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Super Bright Green Typ. 565 568 30 15 2.2 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Green 105 25 140 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAB9029 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1204000010 Super Bright Green APEKA3224SGC SPEC NO: DSAB9029 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1204000010 APEKA3224SGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB9029 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1204000010 PACKING & LABEL SPECIFICATIONS APEKA3224SGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB9029 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1204000010