APEKA3224SURC

3.2x2.4mm RIGHT ANGLE SMD CHIP LED LAMP APEKA3224SURC HYPER RED Features 3.2mmx2.4mm RIGHT ANGLE SMT LED, 2.4mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1155 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1204000011 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APEKA3224SURC HYPER RED (InGaAlP) WATER CLEAR 110 Typ. 280 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1155 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1204000011 Hyper Red APEKA3224SURC SPEC NO: DSAD1155 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1204000011 APEKA3224SURC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAD1155 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1204000011 PACKING & LABEL SPECIFICATIONS APEKA3224SURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1155 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1204000011