APEKA4030PBC

4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APEKA4030PBC/A-F01 BLUE Features 4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE :500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5707 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP:1204000802 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20 mA Min. APEKA4030PBC/A-F01 BLUE (InGaN) WATER CLEAR 36 Typ. 80 Viewing Angle [1] 2θ1/2 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] ∆λ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 468 470 21 100 3.3 3.8 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 114 30 100 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAG5707 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP:1204000802 Blue APEKA4030PBC/A-F01 SPEC NO: DSAG5707 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP:1204000802 APEKA4030PBC/A-F01 Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5707 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP:1204000802 PACKING & LABEL SPECIFICATIONS APEKA4030PBC/A-F01 SPEC NO: DSAG5707 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP:1204000802