4.0x3.0mm RIGHT ANGLE SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
APEKA4030TGC
GREEN
Features
4.0mmx3.0mm RIGHT ANGLE SMT LED, 2.65mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE :500PCS / REEL. RoHS COMPLIANT.
Description
The Green source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.
Package Dimensions
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice.
SPEC NO: DSAD1188 APPROVED: J. Lu
REV NO: V.2 CHECKED: Allen Liu
DATE: JUN/30/2005 DRAWN: H.Q.YUAN
PAGE: 1 OF 5 ERP:1204000453
Selection Guide
Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APEKA4030TGC GREEN (InGaN) WATER CLEAR 50 Typ. 100 Viewing Angle 2θ1/2 90°
Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 500 505 30 56 3.6 4.4 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature
Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Green 110 30 150 5 -40°C To +85°C
Units mW mA mA V
SPEC NO: DSAD1188 APPROVED: J. Lu
REV NO: V.2 CHECKED: Allen Liu
DATE: JUN/30/2005 DRAWN: H.Q.YUAN
PAGE: 2 OF 5 ERP:1204000453
Green
APEKA4030TGC
SPEC NO: DSAD1188 APPROVED: J. Lu
REV NO: V.2 CHECKED: Allen Liu
DATE: JUN/30/2005 DRAWN: H.Q.YUAN
PAGE: 3 OF 5 ERP:1204000453
APEKA4030TGC
Recommended Soldering Pattern (Units : mm)
Tape Specifications (Units : mm)
SPEC NO: DSAD1188 APPROVED: J. Lu
REV NO: V.2 CHECKED: Allen Liu
DATE: JUN/30/2005 DRAWN: H.Q.YUAN
PAGE: 4 OF 5 ERP:1204000453
PACKING & LABEL SPECIFICATIONS
APEKA4030TGC
Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1188 APPROVED: J. Lu
REV NO: V.2 CHECKED: Allen Liu
DATE: JUN/30/2005 DRAWN: H.Q.YUAN
PAGE: 5 OF 5 ERP:1204000453
很抱歉,暂时无法提供与“APEKA4030TGC”相匹配的价格&库存,您可以联系我们找货
免费人工找货