APETD3528SEC

3.5 x2.8mm SMD CHIP LED LAMP Part Number: APETD3528SEC Super Bright Orange Features Description z Single color. The Super Bright Orange device is made with AlGaInP (on z Suitable for all SMT assembly and solder process. GaAs substrate) light emitting diode chip. z Available on tape and reel. z Package: 500pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK6149 REV NO: V.3 DATE: MAY/18/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203011087 Selection Guide Part No. Dice APETD3528SEC Iv (mcd) [2] @ 20mA Lens Type Super Bright Orange (AlGaInP) Viewing Angle [1] Min. Typ. 2θ1/2 500 900 60° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Orange Units Power dissipation 125 mW DC Forward Current 50 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAK6149 REV NO: V.3 DATE: MAY/18/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203011087 Super Bright Orange APETD3528SEC SPEC NO: DSAK6149 REV NO: V.3 DATE: MAY/18/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203011087 APETD3528SEC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK6149 REV NO: V.3 DATE: MAY/18/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203011087 PACKING & LABEL SPECIFICATIONS APETD3528SEC SPEC NO: DSAK6149 REV NO: V.3 DATE: MAY/18/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203011087