APG1005RWF-T-5MAV

1.0X0.5X0.2mm (0402)SMD CHIP LED LAMP Part Number: APG1005RWF-T-5MAV White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions z 1.0mmX0.5mm SMD LED, 0.2mm thickness. z The source color devices are made with InGaN on SiC substrate Light Emitting Diode. z Low power consumption. z Electrostatic discharge and power surge could damage z Wide viewing angle. z Compatible with automatic placement equipment. z Ideal for backlight and indicator. the LEDs. z It is recommended to use a wrist band or antielectrostatic glove when handling the LEDs. z Package: 4000pcs / reel. z Moisture sensitivity level : level 3. z Low current IF=5mA operating. z All devices, equipments and machineries must be electrically grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAN2658 REV NO: V.6B APPROVED: Wynec CHECKED: Allen Liu DATE: JUL/01/2016 DRAWN: L.T.Zhang PAGE: 1 OF 6 ERP: 1203013981 Selection Guide Part No. Emitting Color (Material) APG1005RWF-T-5MAV White (InGaN) Viewing Angle [1] Iv (mcd) [2] @ 5mA Lens Type Min. Typ. 2θ1/2 40 85 120° Yellow Fluorescent Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Emitting Color VF [1] Forward Voltage White IR Reverse Current White Chromaticity Coordinates White X [2] Typ. Max. Units Test Conditions 2.9 3.1 V IF=5mA 50 uA VR = 5V 0.31 Y [2] 0.31 Notes: 1. Forward Voltage: +/-0.1V. 2. Measurement Tolerance Of The Chromaticity Coordinates Is ±0.01. 3. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Values Units Power dissipation 32 mW DC Forward Current 10 mA Peak Forward Current [1] 100 mA 5 V 1000 V Reverse Voltage Electrostatic Discharge Threshold (HBM) Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAN2658 REV NO: V.6B APPROVED: Wynec CHECKED: Allen Liu DATE: JUL/01/2016 DRAWN: L.T.Zhang PAGE: 2 OF 6 ERP: 1203013981 White APG1005RWF-T-5MAV SPEC NO: DSAN2658 REV NO: V.6B APPROVED: Wynec CHECKED: Allen Liu DATE: JUL/01/2016 DRAWN: L.T.Zhang PAGE: 3 OF 6 ERP: 1203013981 APG1005RWF-T-5MAV White CIE 0.40 c0 0.35 y b1 0.30 b2 a0 0.25 a2 0.20 0.20 0.25 0.30 0.35 0.40 x a2 b1 x y x y x y 0.263 0.213 0.282 0.245 0.298 0.271 0.282 0.245 0.298 0.271 0.313 0.296 0.265 0.265 0.286 0.299 0.306 0.332 0.242 0.226 0.265 0.265 0.286 0.299 0.313 0.296 0.329 0.325 0.329 0.325 0.358 0.372 0.329 0.371 0.363 0.400 0.306 0.332 0.329 0.371 a0 c0 b2 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. SPEC NO: DSAN2658 REV NO: V.6B APPROVED: Wynec CHECKED: Allen Liu DATE: JUL/01/2016 DRAWN: L.T.Zhang PAGE: 4 OF 6 ERP: 1203013981 APG1005RWF-T-5MAV Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern Reel Dimension Mask open area ratio:80% Mask thickness:80~100um Tape Dimensions (Units : mm) SPEC NO: DSAN2658 REV NO: V.6B APPROVED: Wynec CHECKED: Allen Liu DATE: JUL/01/2016 DRAWN: L.T.Zhang PAGE: 5 OF 6 ERP: 1203013981 PACKING & LABEL SPECIFICATIONS APG1005RWF-T-5MAV Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAN2658 REV NO: V.6B APPROVED: Wynec CHECKED: Allen Liu DATE: JUL/01/2016 DRAWN: L.T.Zhang PAGE: 6 OF 6 ERP: 1203013981