APG1005VWF-A1-5MAV

APG1005VWF-A1-5MAV 1.0 x 0.5 x 0.2 mm (0402) SMD Chip LED Lamp DESCRIPTIONS     PACKAGE DIMENSIONS The source color devices are made with InGaN on Sapphire substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES          1.0 mm x 0.5 mm SMD LED, 0.2 mm thickness Low power consumption Wide viewing angle Compatible with automatic placement equipment Ideal for backlight and indicator Package: 4000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant APPLICATIONS      RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number APG1005VWF-A1-5MAV Emitting Color (Material) White (InGaN) Iv (mcd) @ 5mA [2] Viewing Angle [1] Lens Type Yellow Fluorescent Min. Typ. 2θ1/2 180 310 160° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. © 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0073 / 1203016033 Rev No: V.2B Date: 04/27/2022 Page 1 / 5 APG1005VWF-A1-5MAV ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color Chromaticity Coordinates x IF = 5mA x [1] Chromaticity Coordinates y IF = 5mA Value Unit Typ. Max. White 0.31 - - y [1] White 0.31 - - Forward Voltage IF = 5mA VF [2] White 2.9 3.2 V Reverse Current (VR = 5V) IR White - 50 µA Temperature Coefficient of x IF = 5mA, -10°C ≤ T ≤ 85°C TCx White -0.18 - 10-3/°C Temperature Coefficient of y IF = 5mA, -10°C ≤ T ≤ 85°C TCy White -0.19 - 10-3/°C Temperature Coefficient of VF IF = 5mA, -10°C ≤ T ≤ 85°C TCV White -3 - mV/°C Notes: 1. Measurement tolerance of the chromaticity coordinates is ±0.01. 2. Forward voltage: ±0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Power Dissipation PD 16 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +85 °C DC Forward Current IF 5 mA IFM [1] 25 mA Electrostatic Discharge Threshold (HBM) - 250 V Thermal Resistance (Junction / Ambient) Rth JA [2] 690 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 570 °C/W Peak Forward Current Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rt h JA ,Rt h JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. © 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0073 / 1203016033 Rev No: V.2B Date: 04/27/2022 Page 2 / 5 APG1005VWF-A1-5MAV TECHNICAL DATA SPATIAL DISTRIBUTION 0° -15° Ta = 25 °C 15° -30° 30° -45° 45° 60° -60° 75° -75° -90° 1.0 0.5 0.0 90° 1.0 0.5 WHITE Ta = 25 °C 4 3 2 1 0 2.3 2.5 2.7 2.9 3.1 Forward voltage (V) Permissible forward current (mA) 1.0 Luminous intensity normalised at 5 mA 5 Forward current (mA) Forward Current Derating Curve Luminous Intensity vs. Forward Current Ta = 25 °C 0.8 0.6 0.4 0.2 0.0 3.3 0 1 2 3 4 Forward current (mA) 5 Luminous Intensity vs. Ambient Temperature 2.5 7 Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage 6 5 4 3 2 1 0 -40 -20 0 20 40 60 80 Ambient temperature (°C) 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) 100 CIE CHROMATICITY DIAGRAM 0.40 c0 a2 0.35 b1 y 0.30 b2 b2 a0 0.25 c0 a2 0.20 0.20 0.25 0.30 0.35 0.40 x © 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0073 / 1203016033 Rev No: V.2B Date: 04/27/2022 x y x y 0.263 0.213 0.282 0.245 0.282 0.245 0.298 0.271 0.265 0.265 0.286 0.299 0.242 0.226 0.265 0.265 0.298 0.271 0.313 0.296 0.313 0.296 0.329 0.325 0.306 0.332 0.329 0.371 0.286 0.299 0.306 0.332 0.329 0.325 0.358 0.372 0.363 0.400 0.329 0.371 a0 b1 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. Page 3 / 5 APG1005VWF-A1-5MAV REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS © 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0073 / 1203016033 Rev No: V.2B Date: 04/27/2022 Page 4 / 5 APG1005VWF-A1-5MAV RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standard Test Conditions Test Times / Cycles Number of Damaged 1 Continuous operating test EIAJ ED-4701/100 (101) Ta = 25°C,RH < 75% IF = maximum rated current * 1,000 h 0 / 22 2 High temp. & humidity storage test EIAJ ED-4701/100 (103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 3 Resistance to Soldering Heat (Reflow Soldering) EIAJ ED-4701/300 (301) Tsld = 260°C, 5 sec 2 times 0 / 22 4 Solderability (Reflow Soldering) EIAJ ED-4701/300 (303) Tsld = 245°C, 5 sec 1 time over 95% 0 / 22 5 Thermal shock test EIAJ ED-4701/300 (307) Ta = -40°C(15min) ~ 100°C(15min) 100 cycles 0 / 22 6 Vibration test EIAJ ED-4701/400 (403) 100 ~ 2000 ~ 100HZ Sweep 4 times. 200m/s² 3directions, 4cycles 48 min. 0 / 22 7 Drop JIS C0044 H= 100 cm 3 cycles 0 / 22 Note: Refer to forward current vs. derating curve diagram. Criteria for Judging Damage Item Symbol Test Conditions Failure Criteria luminous Intensity lV IF = 5mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 5mA Testing Max. Value ≥ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥ Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. The customer should verify the product's performance and lifetime are suitable for the customer's specific operating conditions and requirements. 4. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 5. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 6. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 7. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes © 2022 Kingbright. All Rights Reserved. Spec No: DSAQ0073 / 1203016033 Rev No: V.2B Date: 04/27/2022 Page 5 / 5