APH1608RWF-A

1.6X0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APH1608RWF/A WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Features ●1.6mmX0.8mm SMT LED, 0.65mm THICKNESS. ●LOW POWER CONSUMPTION. ●WIDE VIEWING ANGLE. ●IDEAL FOR BACKLIGHT AND INDICATOR. ●PACKAGE: 2000PCS / REEL . MOISTURE SENSITIVITY LEVEL : LEVEL 3. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY:7.9 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications t raffic signaling. b acklighting (illuminated advertising , general lighting). i nterior and exterior automotive lighting. s ubstitution of micro incandescent lamps. r eading lamps. s ignal and symbol luminaire for orientation. m arker lights (e.g. steps, exit ways, etc). d ecorative and entertainment lighting. i ndoor and outdoor commercial and residential P ackage Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 1 OF 7 ERP: 1203005370 S election Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. APH1608RWF/A WHITE (InGaN) YELLOW FLUORESCENT 70 Typ. 140 Note2 Φv (mlm) @ 20 mA Typ. 520 Note3 Viewing Note1 Angle 2θ1/2 150° Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Junction/solder point Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 114 5 110 -40 To +85 -40 To +100 30 100 400 150 Unit mW V °C °C °C mA mA °C/W °C/W N otes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 p er pad), Electrical / Optical Characteristics at TA=25°C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 10-3 / °C 10-3 / °C mV/ °C Temperature coefficient of x IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of y IF=20mA, -10°C≤ T≤100°C [Typ.] Temperature coefficient of VF IF=20mA, -10°C≤ T≤100°C [Typ.] VF Note2 Symbol X Y Note1 Value 0.31 0.31 2.7 3.3 3.8 0.01 Unit - Note1 V Reverse Current (VR=5V) μA TCy -0.2 TCV -2.5 N otes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 2 OF 7 ERP: 1203005370 B rightness codes luminous Intensity Iv(mcd) @ 20 mA Code. M N P Q Min. 70 110 180 280 Note1 Φv (mlm) @ 20 mA Max. 130 220 320 420 Typ. 300 480 710 960 Note2 N otes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APH1608RWF/A SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 3 OF 7 ERP: 1203005370 APH1608RWF/A SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 4 OF 7 ERP: 1203005370 Color Codes White CIE 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 c1 b4 c0 b3 b1 b2 a1 a0 a0 X Y 0.264 0.283 0.296 0.267 0.305 0.276 0.280 0.248 X Y a1 0.248 0.275 0.283 0.286 0.321 0.305 0.264 0.267 X Y b1 0.283 0.330 0.330 0.305 0.360 0.339 0.287 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 X Y 0.287 0.330 0.330 0.295 0.339 0.318 0.296 0.276 X Y b3 0.275 0.298 0.306 0.321 0.350 0.332 0.283 0.305 X Y b4 0.298 0.321 0.330 0.350 0.379 0.360 0.306 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 X Y 0.330 0.361 0.356 0.360 0.385 0.351 0.330 0.318 X Y c1 0.321 0.366 0.361 0.379 0.419 0.385 0.330 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 5 OF 7 ERP: 1203005370 APH1608RWF/A R ecommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 6 OF 7 ERP: 1203005370 PACKING & LABEL SPECIFICATIONS APH1608RWF/A SPEC NO: DSAG3635 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: JUN/29/2007 DRAWN: D.M.LIU PAGE: 7 OF 7 ERP: 1203005370