APHB1608SGNC

1.6x0.8x0.5mm BI-COLOR SURFACE MOUNT LED Part Number: APHB1608SGNC Super Bright Green Pure Orange Features Descriptions z 1.6mmX0.8mm SMD LED, 0.5mm thickness. z The Super Bright Green source color devices are made z Compatible with reflow soldering. z Available in various color combination. with Gallium Phosphide Green Light Emitting Diode. z The Pure Orange source color devices are made with z Package: 2000pcs / reel . Gallium Arsenide Phosphide on Gallium Phosphide Pure z Moisture sensitivity level : level 3. Orange Light Emitting Diode. z Tinned pads for improved solderability. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK7901 REV NO: V.7A DATE: JUN/30/2016 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203011316 Selection Guide Part No. Emitting Color (Material) Min. Typ. 5 15 *5 *15 7 15 *3 *10 Super Bright Green (GaP) APHB1608SGNC Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Water Clear Pure Orange (GaAsP/GaP) 2θ1/2 130° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Emitting Color Typ. λpeak Peak Wavelength Super Bright Green Pure Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 607 nm IF=20mA Super Bright Green Pure Orange 568 602 nm IF=20mA Spectral Line Half-width Super Bright Green Pure Orange 30 35 nm IF=20mA C Capacitance Super Bright Green Pure Orange 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green Pure Orange 2.2 2.05 2.5 2.5 V IF=20mA IR Reverse Current Super Bright Green Pure Orange 10 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Pure Orange Units 62.5 62.5 mW DC Forward Current 25 25 mA Peak Forward Current [1] 140 145 mA Power dissipation Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAK7901 REV NO: V.7A DATE: JUN/30/2016 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203011316 APHB1608SGNC Super Bright Green SPEC NO: DSAK7901 REV NO: V.7A DATE: JUN/30/2016 PAGE: 3 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203011316 Pure Orange SPEC NO: DSAK7901 REV NO: V.7A DATE: JUN/30/2016 PAGE: 4 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203011316 APHB1608SGNC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK7901 REV NO: V.7A DATE: JUN/30/2016 PAGE: 5 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203011316 PACKING & LABEL SPECIFICATIONS APHB1608SGNC Terms and conditions for the usage of this document 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAK7901 REV NO: V.7A DATE: JUN/30/2016 PAGE: 6 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1203011316