APHBM2012CGKSYKC

2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHBM2012CGKSYKC Green Super Bright Yellow Features 2.0mmx1.25mm SMT LED, 0.45mm MAX. THICKNESS. BI -COLOR, LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG8825 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203006101 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Green (InGaAlP) APHBM2012CGKSYKC Super Bright Yellow (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 120° Typ. 80 150 36 WATER CLEAR 50 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Green Super Bright Yellow Typ. 574 590 570 590 20 20 15 20 2.1 2 2.5 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 75 30 150 5 Super Bright Yellow 75 30 175 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAG8825 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203006101 APHBM2012CGKSYKC Green SPEC NO: DSAG8825 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203006101 Super Bright Yellow SPEC NO: DSAG8825 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203006101 APHBM2012CGKSYKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG8825 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203006101 PACKING & LABEL SPECIFICATIONS APHBM2012CGKSYKC SPEC NO: DSAG8825 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203006101