APHBM2012PBASURKC

2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHBM2012PBASURKC Blue Hyper Red Features 2.0mmx1.25mm SMT LED, 0.45mm MAX. THICKNESS. BI -COLOR, LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG7624 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203005980 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Blue (InGaN) APHBM2012PBASURKC Hyper Red (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 120° Typ. 50 200 18 WATER CLEAR 70 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Blue Hyper Red Blue Hyper Red Blue Hyper Red Blue Hyper Red Blue Hyper Red Blue Hyper Red Typ. 468 650 470 635 21 28 100 35 3.2 1.95 4 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 120 30 100 5 Hyper Red 75 30 185 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAG7624 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203005980 APHBM2012PBASURKC Blue SPEC NO: DSAG7624 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203005980 Hyper Red SPEC NO: DSAG7624 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203005980 APHBM2012PBASURKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG7624 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203005980 PACKING & LABEL SPECIFICATIONS APHBM2012PBASURKC SPEC NO: DSAG7624 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/17/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203005980